For K Series K20 K24 radiator hose k swap Swivel Neck Thermostat Housing

Description

Home
Payment
Shipping
About us
Contact us
Details
From the manufacture
Perfectly suitable for Honda Accord K Series K20 K24, please check the product title or description make sure it fits for you before ordering.
Adjustable, set the radiant hose at any angle including a premium thermostat Engine exchange fan switch port.
The thermostat automatically adjusts the amount of water entering the chiller to the chilled water temperature to ensure that the engine is operating in the correct temperature range.
Designed and developed with quality material, it is very durable in use, anti-corrosion and wear resistance.
Easy to Install: This product is made with the original data, direct installation does not need to be modified, convenient and save your time.
Specification:
Material: Stainless Steel
Color: Silver
Engine: K20 K20a K20a2 K20z1 K24A K24Z
Package Weight: Approx 461g
Fitment: For Honda Civic Accord Acura TSX K20 K20a K20a2 K20z1 K24A K24Z
Package List:
1 * Thermostat Housing
1 * set Installation Accessories
Note:
1.Please ensure this part fits for your car before you place an order.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Circlip
There is a circlip on the back of the thermostat. When pressure is applied to the plate, an O-ring is placed inside to lock it in position so that it can continue to rotate around.
Installation
Install the rotating neck to fix the thermostat, rotate it to find the desired position, so that the condensate can flow from the water outlet to any place
Space
The thermostat has deleted the outer shell of the water pump factory. If you want to keep the rubber hose connected to the upper part of the motor, you can delete the back seal to remove the steel pipe, and move it to the heating box without using the heater.
The thermostat can solve your lower rad hose problem. The OEM plastic nozzles of some motors we received were broken. So far, you can only order replacement parts from Honda/Acco. The problem is that they only sell houses with thermostats, which are expensive and have no real benefit. If your housing is not damaged, then you still have to get the right hose, the right angle and match it with the radiator. After that, you have to figure out where to put the fan switch, and the only option in the past was to use a special embedded aluminum hose adapter.
This product solves all these problems and gives you some options when making an exchange. The housing is rotatable, allowing you to determine the water outlet angle before tightening. The size of the custom fitting provided is the same as the oem rad hose on one end, and the other end is threaded for AN fittings. This allows you to use any size accessory required for a custom installation. If you want to use a braided hose with AN connector, you can easily tighten the housing, screw on the correct adapter, and everything is ready. There are three ports on the main body of the housing, one for fan switch, one for 1/8 MPT port for pressure gauge, etc., and one for ½NPT port for our optional recirculation accessories.
The rotating neck is pre-installed with a high-quality thermostat (180 degrees), which is fixed in place with a "C" clamp. The kit uses a standard size thermostat, and you can easily replace it with anything in the range of 160-195 degrees. Last but not least, this is the benefit we found when designing. We noticed that by adding a hole in the flange, you can completely remove the OEM black plastic housing from the module and remove the heater core hose. After setting in this way, our thermostat housing is directly bolted to the OEM aluminum water pump housing.
Payment Method
Shipping Policy
Returns Policy
About us
Contact us
Payment
Delivery Details
Returns Policy
[RETURN_POLICE]
About US
Contact US
Home
Payment
Shipping
About us
Contact us